The driver is well built and like most Fostex units, it sounds excellent. Photograph 03 shows the baffles glued and screwed to the braces. As a result, loudspeaker placement is generally not critical, but you do want to keep them off of a wall. Last update 17 December Note – this driver has been discontinued and is no longer being produced. Here the Fostex FEE fullrange driver is used in a small vented bass reflex box. The cone is made of banana plant’s fiber and this it is very light and the driver is fast.
|Date Added:||16 December 2017|
|File Size:||55.50 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Created 19 June Baffle Step Compensation Circuit.
SEALED BIPOLE SPEAKER WITH FOSTEX FE127E
My dog is trying to help so we can finish early. Unfortunately, with all the reflecting going on, many of the timing and phase cues are lost and thus imaging is not as good as a monopole design.
fe127r Here the Fostex FEE fullrange driver is used in a small vented bass reflex box. Photograph 03 shows the baffles glued and screwed to the braces.
The internal dimensions are exactly the same, same driver placement, same driver, except the construction sequence is different. With a sealed enclosure, the back wave does not interfere with the front wave because it is trapped in the sealed box. The driver is well built and like most Fostex units, it sounds excellent. Another ratio sometimes used is 0. As a result, loudspeaker placement is generally not critical, but you do want to keep them off of a wall.
Pushing these tiny X max drivers to produce bass tends to cause some loss of cone control, even at low SPL. A Sealed Enclosure, often referred to as an acoustic suspension enclosure, is the simplest form of a speaker box. There is no rule to say the response has to be flat and in this instance, sounded much better with the 1 dB peak. On my construction, I glued the front fsotex rear baffle first and the sides last this has something to do with the finish I wanted.
FOSTEX FEE SPECIFICATIONS Pdf Download.
This in turn results in unpleasant distortions which are present throughout the mid-range. For two FEE drivers, the optimum volume is about 12L. Additionally, bipoles throw a huge wall of sound which can make them sound very dynamic. I do not have the speakers anymore, my brother begged me for them! While these ratios may not result in aesthetically pleasing dimensions, it is best to keep the internal dimensions from being multiples of any another internal dimension.
A bi-amp speaker terminal was used with one set to the BSC and the other directly to the speaker. In a bipole system, both drivers fire in phase fe127s one another, but in opposite directions. This speaker system is suited for small to medium sized room with low to medium powered amplification. The drivers main flaw is a little bit of shout, which some have managed to address through modifications. Bass is tighter, but of course, you need a subwoofer for frequency lower than 80Hz.
It is magnetically shielded for use near television or CRT monitor. I wanted to do the sealed f127e since this would improve the midrange and the bass will be tighter. The narra was left over from our kitchen cabinets. I elected to go with a bipole enclosure since it eliminates the need for a power grabbing BSC baffle step compensation circuit. On that basis, this project uses a sealed enclosure in an attempt to get the best mid-range performance from these drivers.
Another positive characteristic of a bipole system is that the rear driver compensates for the baffle diffraction stepand thus no electronic correction circuit is required. Even on a ported enclosure, the Fostex FEE drivers do not provide great bass extension, so I still would need a subwoofer. The following circuit was added to the speaker input terminal.
The cone is made of banana plant’s fiber and this it is very light and the driver is fast. Last update 12 July The sound fe127f a bit brilliant and forward.